AC Centrifugal Pumps & AC Peripheral Pumps.
0.75kW, 1.1kW & 1.5kW 220VAC centrifugal clean water pump.
0.37kW & 0.75kW 220VAC peripheral clean water pump.
0.75kW Self Priming Pump
0.75kW Stainless Steel Clean Water Pump
0.75kW Submersible Clean Water Pump
0.75kW Submersible Sewerage Pump
The 0.75kW Submersible Sewerage Pump with Cutter and Float Switch (HVm750CF) is a heavy-duty submersible effluent pump designed for the transfer and disposal of raw sewage, wastewater and effluent containing solids and fibrous material — making it the correct solution for basement drainage, septic tank emptying, greywater transfer and any application where standard clean water pumps would block or fail. The built-in cutter mechanism chops and macerate solids, fibrous material, rags and soft debris before pumping — dramatically reducing blockage risk and allowing the pump to pass material that would otherwise clog a standard submersible pump. This makes it ideal for domestic sewage applications, ablution blocks, caravan parks, construction sites and any installation where wastewater contains solids. The automatic float switch starts the pump when the water level rises to a preset level and stops it when the chamber empties — providing fully automatic hands-free operation without the need for a separate pump controller or manual intervention. Rated IP68 for continuous full submersion, with a 10m power cable and DN50 discharge connection — ready to install into a wet well, sump, septic chamber or underground drainage chamber. Key Features & Specifications:- 0.75kW (1HP) motor- Max flow rate: 333 litres per minute- Max head: 14 metres- Discharge connection: DN50- Protection rating: IP68 — fully submersible- Built-in cutter — chops solids and fibrous material- Automatic float switch included — hands-free operation- 10 metre power cable included- Input: 220-240VAC | 50-60Hz- Max current: 5.2A- Max temperature rating: 40°C- SKU: HVm750CF Typical Applications:- Basement and below-ground drainage sumps- Septic tank and effluent transfer- Construction site dewatering and site drainage- Caravan parks and ablution block drainage- Greywater and wastewater transfer- Underground parking drainage- Any application requiring solids-handling sewage pumping ⚠️ Important Installation Notes:This pump is designed for sewage and effluent containing solids — it is NOT suitable for clean water applications. For clean water transfer, see our 0.75kW Stainless Steel Clean Water Pump (HJM750SS). For installations requiring automatic level control with adjustable setpoints, see our Pump Controllers collection. Order online with fast nationwide delivery across South Africa.Contact us — sales@mapleleafelectrical.co.za or 064 086 3515. Also available in our Pump range:→ 0.75kW Stainless Steel Clean Water Pump→ 0.75kW LCD Self-Priming VSD Pump→ View all AC Pumps→ View all Pump Controllers & Float Switches Input Voltage: 220-240V Frequency : 50-60Hz Max Current : 5.2A Protection Rating: IP68 Max Flow: 333L/Min Cable Length: 10m Max Power: 0.75kW Max Horse Power: 1HP Max Temperature Rating: 40°C Connections: DN50 Max Head: 14m SKU: HVm750CF
R 2,861.43
The 0.75kW Submersible Clean Water Pump (HCWS-750-1.5IN) is a fully submersible 1HP clean water pump designed for installation directly inside water tanks, reservoirs, sumps, shallow boreholes and wet wells — delivering reliable water transfer and pressure supply in South African residential, agricultural and light commercial water supply applications. Unlike surface-mounted pumps that are installed above the water source, this submersible pump is designed to operate fully submerged — making it ideal for JoJo tank bottom transfer, reservoir emptying, shallow borehole water supply and any application where the pump needs to be installed inside the water source itself. Rated IP68 for complete, continuous submersion protection, the HCWS-750-1.5IN delivers a maximum flow rate of 280 litres per minute with a maximum head of 20 metres through a DN40 (1.5 inch) discharge connection — with a 10 metre power cable included for installation flexibility. Submersible vs Surface Pump — Which Do You Need?- Submersible Pump (this pump) — installs inside the water source. Best for JoJo tanks, reservoirs, shallow boreholes and wet wells. Self-priming not required. Quieter operation.- Surface Pump — installs above the water source. Best for pressure boosting from tanks and irrigation. Can pump from further away. Easier to access for maintenance. Key Features & Specifications:- 0.75kW (1HP) motor- Max flow rate: 280 litres per minute- Max head: 20 metres- Discharge connection: DN40 (1.5 inch)- Protection rating: IP68 — fully submersible- 10 metre power cable included- Input: 220-240VAC | 50-60Hz- Max current: 5.2A- Max temperature rating: 40°C- SKU: HCWS-750-1.5IN ⚠️ For Clean Water Only:This pump is designed for clean water transfer only — it is NOT suitable for sewage, effluent or water containing solids. For wastewater applications, see our 0.75kW Submersible Sewerage Pump with Cutter (HVm750CF). Typical Applications:- JoJo tank and rainwater harvesting transfer- Reservoir and storage tank emptying and transfer- Shallow borehole clean water supply- Agricultural irrigation supply from dams and reservoirs- Swimming pool filling and water transfer- Construction site clean water supply- Smallholding and farm water supply Order online with fast nationwide delivery across South Africa.Contact us — sales@mapleleafelectrical.co.za or 064 086 3515. Also available in our Pump range:→ 0.75kW Stainless Steel Surface Clean Water Pump (HJM750SS)→ 0.75kW LCD Self-Priming VSD Pump→ 0.75kW Submersible Sewerage Pump with Cutter (HVm750CF)→ View all AC Pumps→ Single Phase Pump Controller (HS-1P-LDP) 0.75kW Submersible Clean Water Pump 230V Input Voltage: 220-240V Frequency : 50-60Hz Max Current : 5.2A Protection Rating: IP68 Max Flow: 280L/Min Cable Length: 10m Max Power: 0.75kW Max Horse Power: 1HP Max Temperature Rating: 40°C Connections: DN40 Max Head: 20m SKU: HCWS-750-1.5IN
R 2,154.30
The 0.75kW Stainless Steel Clean Water Pump (HJM750SS) is a robust, corrosion-resistant surface pump designed for clean water transfer, pressure boosting and irrigation applications across South Africa. Built with a stainless steel pump casing for long-lasting durability, this 1HP single-phase pump delivers a maximum flow rate of 52 litres per minute with a maximum head of 43 metres — making it ideal for domestic, agricultural and light commercial water supply applications. Typical Applications:- Home and garden irrigation systems- Domestic water pressure boosting- Rainwater tank and JoJo tank transfer- Swimming pool water circulation- Small-scale agricultural irrigation- Clean water transfer on construction sites- Caravan parks and smallholdings Why choose the HJM750SS:- Stainless steel construction — corrosion resistant and long lasting- IP44 rated — protected against water splashing- Single phase 220-240V — plugs into standard SA household supply- 1" inlet and 1" outlet connections — compatible with standard fittings- Max temperature rating 40°C — suitable for South African conditions- Compact and lightweight — easy to install and transport Technical Specifications Stainless Steel Clean Water Pump Input Voltage: 220-240V Frequency : 50-60Hz Max Current : 5.2A Protection Rating: IP44 Max Flow: 52L/Min Max Power: 0.75kW Max Horse Power: 1HP Max Temperature Rating: 40°C Connections: 1”In/1”Out Max Head: 43m SKU:HJM750SS Order online with fast nationwide delivery across South Africa. Contact us for contractor and bulk pricing — sales@mapleleafelectrical.co.za or 064 086 3515.
R 1,929.75
The 0.75kW LCD Self-Priming Water Pump (SHPm750XS) is an intelligent automatic pressure pump with built-in LCD display, designed for domestic water supply, garden irrigation, pressure boosting and rainwater tank transfer in South African homes, smallholdings and light commercial properties. Unlike standard pressure pumps, this self-priming pump can draw water from tanks and reservoirs below the pump level without manual priming — simply connect and switch on. The built-in automatic pressure control starts the pump when water demand is detected and stops it automatically when flow ceases, preventing unnecessary running and extending pump life. The LCD display shows real-time operating data including pressure, flow status and fault information — making monitoring and fault diagnosis simple without specialist knowledge. Built-in dry-run protection stops the pump automatically if no water is available, preventing costly pump damage. Key Features:- 0.75kW (1HP) motor- Self-priming — no manual priming required- Automatic pressure control — starts and stops on demand- LCD display — real-time pressure and fault monitoring- Dry-run protection — protects pump when tank runs dry- Max flow rate: 3m³/h (50 litres per minute)- Max head: 45 metres- 1" inlet and 1" outlet connections- Input: 220V | 50Hz- Max current: 5.2A- Protection rating: IP44- Max temperature rating: 40°C- IEC 60335-1 | IEC 60335-2-41 compliant- SKU: SHPm750XS Why this pump is ideal for South Africa:- Self-priming — no manual priming needed at startup- LCD display — see exactly what the pump is doing- Automatic start/stop — only runs when water is needed- Dry-run protection — safe when tanks run dry during water outages- 220VAC single phase — standard South African household supply- 45m max head — strong enough for multi-storey pressure boosting Typical Applications:- Domestic water pressure boosting- JoJo tank and rainwater harvesting transfer- Garden and drip irrigation supply- Borehole to header tank water transfer- Swimming pool filling and water circulation- Smallholding and agricultural water supply- Carwash and pressure washing water supply ⚠️ Note: If stock is unavailable at time of order, our team will contact you with a full refund option or available alternative. Confirm stock before purchase —sales@mapleleafelectrical.co.za or 064 086 3515. Also available in our Pump range:→ 0.75kW Stainless Steel Clean Water Pump (surface mounted)→ 0.75kW Submersible Clean Water Pump (IP68 submersible)→ 0.75kW Submersible Sewerage Pump with Cutter→ View all AC Pumps→ Single Phase Pump Controller (HS-1P-LDP) Input Voltage: 220V Frequency : 50Hz Max Current : 5.2A Protection Rating: IP44 Max Flow: 3m3/h Max Power: 0.75kW Max HorsePower: 1HP Max Temperature Rating: 40°C Connections: 1”In/1”Out Max Head: 45m IEC 60335-1 | IEC 60335-2-41 SKU: SHPm750XS
R 2,491.76
0.75kW 220VAC Centrifugal Clean Water Pump Protection Rating: IP44 Frequency: 50-60Hz Max Power: 0.75kW Max Temperature rating: 45°C Max Horse Power: 1HP Connections: 1"In/1"Out HCM750
R 1,886.69
1.1kW 220VAC Centrifugal Clean Water Pump. Input Voltage: 220-240V Max Power: 1.1kW Frequency: 50-60Hz Max Horse Power: 1.5HP Max Current: 7.8A Max Temperature Rating: 45°C Protection Rating: IP44 Connections: 1”In/1”Out HCM1100
R 2,949.64
1.5kW 220VAC Centrifugal Clean Water Pump Input Voltage: 220-240V Max Power: 1.5kW Frequency: 50-60Hz Max Horse Power: 2.0HP Max Current: 9.2A Max Temperature Rating: 45°C Protection Rating: IP44 Connections: 1”In/1”Out HCM1500
R 3,326.38
0.37kW 220VAC Peripheral Clean Water Pump Input Voltage: 220-240V Max Power: 0.37kW Frequency: 50-60Hz Max Horse Power: 0.5HP Max Current: 2.8A Max Temperature Rating: 45°C Protection Rating: IP44 Connections: 1”In/1”Out HSM370
R 847.67
0.75kW 220VAC Peripheral Clean Water Pump Input Voltage: 220-240V Max Power: 0.75kW Frequency: 50Hz Max Horse Power: 1.0HP Max Current: 5.2A Max Temperature Rating: 45°C Protection Rating: IP44 Connections: 1”In/1”Out SKU: HSM750
R 1,378.39
